F10 rom based setup

A bad hard disk will stop the post process in it's tracks right there. That will tell you the condition of the driver, and perhaps solve the problem. Occasional Advisor. This symptom will also occur if you have a USB hard disk or iPOD plugged into the usb socket when you reboot the machine.

Make sure you remove the iPod prior to rebooting. I have been having the same problem Other product and company names mentioned herein may be trademarks of their respective owners. Select a location. Europe, Middle East, Africa. Asia Pacific and Oceania. Select a language. Confirm Back. Search all support. Search help. Tips for better search results Ensure correct spelling and spacing - Examples: "paper jam" Use product model name: - Examples: laserjet pro p, DeskJet For HP products a product number.

Loading Results. The Virtual Agent is currently unavailable. Please try again shortly. Need help troubleshooting? When you ran the exe file, an info page should have opened, and you should have seen several different ways to update the BIOS.

Reboot the PC and press F10 to enter setup. F10 ROM based flash can accept the binary file from the root directory of any removable media such as USB or legacy floppy diskette.

The user is prompted when the process is completed. Get a USB flash drive. Format it with the FAT32 file system. View solution in original post. It is not a separate file. Ciao and very thanks for the info I currently have a V I had already downloaded the 1. Download, unzip the file to its folder and copy the file contents of the folder to your USB flash drive. Dont worry , it's an old computer that I reinstalled to run old laboratory tools with National Instruments.

English Translaction: The system does not have the minimum requirements for installing the software. The installation will be aborted. Didn't find what you were looking for? Ask the community. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. The HP logo should be pressed F10 once the unit has been booted.

The DriveLock password will be prompted by the unit. You can disable protection by clicking Disable Protection. Start by running a disk check. Install the boot disk or USB drive, and power the computer on. In step two, run a system file check. Boot the computer from the disk or USB as you did in step one… The third step is to complete a startup repair.

The fourth step is to try restoring your system. The first step is to select Properties.